SE320 NUMERIC

Kategórie: 

SE320 NUMERIC  is a machine designed for small to medium series production of smaller dimensions workpieces. This machine is also suitable for shops with piece production. This lathe can turn simple as well as complex shape workpieces such as flanges and shafts from metal and plastic. SE320 is also suitable as a teaching aid for vocational schools and colleges of technical major. Machine can be operated either in manual mode, by using electronic handwheels, or the technological operations can be performed in automatic mode, thanks to the modern control system. Using the automatic mode opens new possibilities in piece production and in increasing the productivity of small series production.
 
Most important features:

  • Ideal machine for a user switching from conventional to CNC controlled machine
  • Minimal built-up area
  • Easy and comfortable control
  • Long lifetime with focus on keeping high machining accuracy
  • Spindle drive through belts – minimization of vibration level that could negatively influence turning
  • Automatic gear shifting during the working cycle
  • Bearings with lifetime grease filling – low operating costs
  • Annealed machine components for internal stress removal – high accuracy and stability throughout lifetime of the machine
  • Machine covers with reinforced areas – high level of operator protection

 

CHARACTERISTIC FEATURES:

Apron guideways with layer of friction substance  – reaching positional accuracy even at minimal feed Preloaded ground ball screws – high dimensional accuracy of workpieces Machine geometry measuring by laser device – exact setting of machine axis parameters
Variability of selection of optional turrets Constant cutting speed – high quality of turned surfaces Variety of control systems

 

These machines combine advantages of conventional and CNC lathes. The machine works as a conventional lathe, in manual mode, being controlled by the hand wheels. If required, the operation mode can be shifted to the full CNC control. Technological operations of machining can be programmed by simple filling-in the pre-defined cycles or eventually by standard programming. Machines are therefore suitable for piece and small-series production of simple as well as complex shapes of the workpieces from metal and plastic. Geometric accuracy of the machines fulfills norms  ISO 1708 and ISO 230-1.

MAIN ADVANTAGES:

  • Ideal machine for a user switching from conventional to CNC controlled lathe
  • Easy operation
  • Manual, cycle and automatic mode
  • Software support for contour programming as well as DIN programming
  • Axis positioning through servomotors
  • Control system options - SIEMENS, FANUC, HEIDENHAIN
  • Option of 8-positional turret with/without live tools
  • Wide scope of executions and accessories – hydraulic clampings, chip conveyors, drilling bar holders, steady and follow rests, faceplates and chucks, hydraulic tailstock
Typ stroja jedn. SE320 NUMERIC SE520 NUMERIC SE820 NUMERIC SE1020 NUMERIC SE520 SL NUMERIC
Working Range :            
Max. swing over bed mm 320 520 520 800 1020
Max. swing over cross slide mm 170 290 290 515 740
Max. turned diameter with MultiSuisse toolpost mm B 320 B 526/ C 476   C 825 C 1040
Max. turned diamerer with turret SAUTER mm 210 310   665 965
Distance between centers mm 750 950/1450* 2000 2000/3000*/4000*/6000*/8000* 2000/3000*/4000*/6000*/8000*
Height of centers mm 150 250 250 394 509
Max. bar diameter mm 41/55* 75/103* 75/103* 130 130
Bed width mm 300 360   550 550
             
Main spindle :            
Spindle nose DIN (ISO702-III)   B5/B6* B8/B11* B8/B11*    
Spindle nose Camlock (ISO702-II)   D6* D8*/D11* D8*/D11* D11* D11*
Spindle nose A2 (ISO702-I)         A2-11 A2-11
Spindle bore mm 42/57* 77/105* 77/105* 133 133
Spindle diameter in front bearing     mm 70/90* 120/150* 120/150* 180 180
Max. spindle speed - 1st gear min -1 880 650 650 415 415
Max. spindle speed - 2nd gear min -1 3500 2600 2600/2200* 1600 1600
Manual clamping mm 160/200* 250/315* 250/315* 400/500* 400/500*
Hydraulic clamping* mm  - 200* 210 315/400* 315/400*
             
Spindle drive :            
Main motor output S1 kW 7 11 11 30 30
Main motor output S6 kW 10 15 15 45 45
Torque - 1st gear S1 Nm 210 525 525 2982 2982
Torque - 1st gear S6 Nm 285 715 715 4473 4473
Torque - 2nd gear S1 Nm 52 132 132 761 761
Torque - 2nd gear S6 Nm 70 180 180 1142 1142
             
Carriages and drives :            
X-axis            
Cross slide feed range mm.min -1 1÷3000 1÷5000 1÷3000 1÷3000 1÷3000
Cross-slide rapid traverse mm.min -1 3000 6500 3000 5000 5000
Working travel mm 183 270 270 405/550* 550
Z-axis            
Longitudinal slide feed range mm.min -1 1÷5000 1÷5000 1÷5000 1÷5000 1÷5000
Longitudinal slide rapid traverse mm.min -1 10000 6500 10000 6000/5000* 6000/5000*
Working travel mm 790 950/1450* 2110 1925/2925*/3925*/5925*/7925* 1925/2925*/3925*/5925*/7925*
             
Toolposts            
Quick change tool post   MultiSuisse B MultiSuisse B MultiSuisse B* MultiSuisse C MultiSuisse C
Max. tool size mm 25x25 25x25 25x25 32x32 32x32
Quick change tool post     MultiSuisse C* MultiSuisse C MultiSuisse D* MultiSuisse D*
Max. tool size mm   32x32* 32x32 40x40* 40x40*
             
Manual tool post systems*            
Quick change tool post     Parat RD 2* Parat RD 2* Parat RD 4* Parat RD 4*
Max. tool cross-section mm   25x25 25x25 50x50* 50x50*
Quick change tool post     Parat RD 3* Parat RD 3*    
Max. tool cross-section mm   32x32 32x32    
Quick change tool post     Algra TGA-R-250* Algra TGA-R-250*    
Max. tool cross-section mm   25x25 25x25    
Quick change tool post     Algra TGA-R-300* Algra TGA-R-300*    
Max. tool cross-section mm   32x32 32x32    
Quick change rotating tool holder Coromant Capto     Capto C4/Multifix C*      
Max. tool cross-section mm   32x32      
Quick change rotating tool holder Coromant Capto     Capto C4/Multifix C*      
Max. tool cross-section mm   32x32      
             
Automatic turrets*            
4-way turret without live tools*         SAUTER* SAUTER*
No. of tool positions  (DIN 69881)         4* 4*
Max. tool diameter mm       80* 80*
Max. tool cross-section mm       32x32* 32x32*
             
Axial turret without live tools*   SAUTER* SAUTER* SAUTER* SAUTER* SAUTER*
No. of tool positions   8* 8* 8* 8* 8*
Tool shank diameter (according to DIN 69880) mm 20* 30* 30* 50* 50*
Max. tool cross-section mm 16x12* 20x16* 20x16* 32x25* 32x25*
             
Axial turret with live tools*     SAUTER* SAUTER* SAUTER* SAUTER*
No. of tool positions     8* 8* 8* 8*
No. of driven tool positions     8* 8* 8* 8*
Tool shank diameter (according to DIN 69880) mm   30* 30* 50* 50*
Max. tool cross-section mm   20x16* 20x16* 32x25* 32x25*
Driven tools motor output kW   4,5* 4,5* 5,7* 5,7*
Max. torque Nm   20* 20* 35,7* 35,7*
Max. RPM min -1   4000* 4000* 3400* 3400*
             
Tailstock :            
Tailstock sleeve internal taper   MORSE 4 MORSE 5 MORSE 5 MORSE 6 MORSE 6
Tailstock sleeve diameter mm 60 80 80 120 120
Tailstock sleeve travel mm 120 160 160 210 210
Tailstock travel mm          
Tailstock control   manual manual manual manual manual
Clamping force range* (optional hydraulic tailstock sleeve travel) daN   80-800* 80-800* 300/2500 300/2500
             
Machine dimensions :            
Height mm 1735 1800 1800 2115 2115
Width mm 1490 1560 1850 2325 2325
Length (with chip pan) mm 2415 2790/3290* 3930 4604/5632*/6660*/8604*/10604* 4604/5632*/6660*/8604*/10604*
Length (with chip conveyor to the right side)* mm 3300* 4110*/4610* 5450* 5955*/6955*/7955*/9955*/11955* 5955*/6955*/7955*/9955*/11955*
             
Weight :            
Weight (without optional accessories) kg cca 1600 cca 2700/2900* cca3800 cca 7000/8000*/9000*/10000*/11000* cca 7000/8000*/9000*/10000*/11000*
             
Control systems:            
SIEMENS 840D SolutionLine + ShopTurn   yes yes yes yes yes
FANUC 0iTD + Manual Guide i   yes yes yes yes yes
HEIDENHAIN MANUAL Plus 620   yes yes yes yes yes
https://www.trens.sk/en/sites/default/files/TRENS_%20SE_320_520_ENG.pdf